Innsbruck Genuine Leather Fingerprint Lock Crossbody Bag

The main zipper locks into a FIPILOCK lock that opens only when a registered finger touches the sensor. No code to remember: it opens in under a second, remembers up to 10 fingerprints and charges with a USB-C cable.

1. 1Step 1: Pair the electronic key (once, before anything else)

   • Take the electronic key out of the box and plug it into the charging port on the lock.
   • Touch the sensor with any finger until the green light flashes for about 2 seconds. The key is now paired with your bag.
   • Unplug the key and keep it at home. From now on it works with this bag only, and with no other bag.

   Pair the key before you register a fingerprint: pairing erases any fingerprints already saved.

2. 2Step 2: Set the owner's fingerprint (once, before first use)

   • Press and hold a finger on the sensor for about 3 seconds, until the blue light comes on, then let go.
   • Place the same finger on the sensor more than 10 times, at a slightly different angle each time.
   • Green light: the fingerprint is saved. From now on only a registered finger opens the lock.

   A red light during setup is normal, you can ignore it.

3. 3Step 3: Add another person (up to 10 fingerprints)

   • Press any finger on the sensor for about 3 seconds, until the blue and red lights flash.
   • The owner places their finger once to approve, and the blue light stays on.
   • The new person places their finger more than 10 times, until the light goes off.
   • Green light: the new fingerprint is saved.

4. 4Step 4: Opening and locking, day to day

   • To open: touch the sensor with a registered finger, and the zipper pull tab is released from the lock in under a second.
   • To lock: push the zipper pull tab back into the lock until it clicks into place.

5. 5Step 5: Erase all fingerprints

   • Press any finger on the sensor for 8 to 9 seconds, until the red light flashes, then let go.
   • The owner places their finger once, and the blue light comes on.
   • All fingerprints are erased and the lock is back to its original state, where any finger opens it. You can set a new owner.

   Red and blue flashes while erasing are normal.

6. 6Step 6: Can't open it? Use the electronic key

   • Plug the bag's electronic key into the charging port on the lock.
   • Touch the sensor with any finger until the green light flashes for about 2 seconds.
   • All fingerprints are erased and the lock is back to its original state: any finger opens it, and the bag opens.
   • Register the owner's fingerprint again (step 2) so the bag locks to you only once more.

   Useful when your finger isn't read, when the person who registered isn't around, or when you pass the bag on to someone else.

Charging: the lock charges with a USB-C cable (5V) through the port on the lock. Built-in 3.7V 120mAh battery with very low standby use, working from -4°F to 131°F (-20°C to 55°C).